Brakes/Levers/Pads

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor - Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors - Designed for up to 210mm rotors - Tabs in adapter mate to (6) M5 rotor bolt holes and is secured by CenterLock-style lockring, sandwiching 6-bolt rotor to adapter - Lockring requires a 16-notch external bearing bottom bracket wrench - CL-IS adapter is black and lockring is black with silver etching: 29g

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

Hose fittings for Hayes hydraulic disc brakes

Kool-Stop's Campi 2000 insert pad was designed to fit Campagnolo systems made after the year 2000. Features: - Patented Plow Tip - Water Grooves - Dove Tail fit - Rim Friendly - Replacement pads for Campagnolo 10-speed groups Black: standard compound designed for dry condition riding Dual: combination of Salmon and Black compounds for more controlled, smoother stopping Carbon 2: updated formula for carbon rims, withstands steep descents with reduced wear Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions.

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Brass compression olive for Hope hydraulic disc brakes.

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

Replacement inserts for Shimano cartridge v-brake pads - Black: standard compound designed for dry condition riding - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Green: designed for ceramic coated rims - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

• All weather compound • Cantilever post style • Offset Post • Black • 70mm

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

- Thinline: Thinner, longer molded pads for extra clearance and easy adjustment - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- High performance compounds recommended for all-conditions - Steel backing

Shimano G04S metal disc brake pads. - Fits XTR BR-M9000, BR-M9020, BR-M985, XT BR-M8000, BR-M785, SLX BR-M666, Alfine BR-S700 and BR-R785, BR-RS785 road disc calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Ventilated steel backing plate for improved heat dispersion - Backing Plate Material: Steel - Compound: Metal

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Shimano's disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system for all-conditions braking. Continuously cooling itself, this rotor helps keep brake power consistent and improves pad life.

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

SRAM's Centerline Rotor delivers consistent, quiet and powerful braking. The rotor has a consistent center of friction throughout rotation to minimize vibration, so the only thing you'll notice about your brakes is how well they perform.

Shimano H03C Metal Disc Brake Pads keep you in control in any conditions with cooling fins for those endless, grin-inducing descents.. - Fits Saint BR-M820 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Aluminum radiator cooling fins increase pad life and reduce brake fade

Shimano's Deore XT Ice-Tech rotors utilize the industry standard 6-bolt mounting system for secure mounting. These rotors use an aluminum core with steel outer plates to better control the temperature of the braking surface. This means quieter braking and, more importantly, less fade on long downhills and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.

Shimano Deore XT SM-RT86 6-Bolt rotors feature a 3-layer construction with an aluminum core and two stainless steel outer layers. Reducing rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors, the result is better braking performance and reduced brake fade. - Aluminum spider - Includes rotor fixing bolts and locking washers

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

Jagwire's LR1 Pro Lightweight Rotors are a stylish way to upgrade the performance on your bike. Utilizing a 2-piece construction, they feature a separate aluminum spider and stainless steel brake track. The steel braking surface delivers quiet, consistent performance while the spider helps reduce rotating weight by about 15% compared to a traditional single-piece rotor. - The high quality, durable stainless steel machined braking surface ensures consistent stopping power and superior modulation - Lightweight aluminum spider keeps weight to a minimum - Available for either Center Lock or 6-Bolt ISO hubs - NOTE: LR1 rotors are NOT compatible with brakes when the pad extends below the caliper body. Examples include Avid BB7, Avid Juicy, Hayes HFX, and Hayes MX1

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

The Deore XT M8100 hydraulic disc brake is designed to provide high performance braking for a variety of MTB riding styles. Includes the brake lever and disc brake caliper. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8100 2-piston brake caliper is optimized for cross country riding styles - Includes finned metal pads and hose - Brake Caliper Type: Post Mount - Hydraulic Hose Length: 1000mm (Front) / 1700mm (Rear) - Hydraulic Fluid Type: Mineral Oil - Rotor Included: No - Pad Compound: Metallic