Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Avid 20R Brake Pads
$10.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
Avid Disc Brake Pads (Juicy/BB7/BB5)
$18.00 - $28.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Disc Brake Pads (Elixir)
$25.00 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Matchmaker
$25.00
Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.
Avid Disc Brake Pads (Code)
$27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Brooks Cambium C15 All Weather
$120.00
The Cambium C15 All Weather saddle is made for years of hard riding, in a forward riding position, for more sporty cycling. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.
Brooks Cambium C17 All Weather
$120.00
The Cambium C17 All Weather is made for years of hard riding in an angled riding position, for commuting in the city or travelling the globe. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride,” thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.
Cane Creek Hellbender Headset Bearing
$24.00
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
Cane Creek 40 Series Integrated Bottom Bearing
$30.50
This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
Cane Creek 40 IS41/IS52 Tapered Headset
$60.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K|IS52/40/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 87g
Cane Creek 40 ZS44/EC49 Tapered Headset
$75.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6/H8\EC49/40/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 49.61mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 97g
Crank Brothers Premium MTB Cleats
$25.00
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees
Crank Brothers Stamp 1 Large
$50.00
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Crank Brothers Stamp 1 Small
$50.00
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Crank Brothers Stamp 1 Small LE
$50.00
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 100mm x 100mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 299g per pair
DT Swiss Centerlock To 6-Bolt Adapter
- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor - Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors - Designed for up to 210mm rotors - Tabs in adapter mate to (6) M5 rotor bolt holes and is secured by CenterLock-style lockring, sandwiching 6-bolt rotor to adapter - Lockring requires a 16-notch external bearing bottom bracket wrench - CL-IS adapter is black and lockring is black with silver etching: 29g
Dia-Compe Straddle Cable Carrier
$3.00
- Aluminum straddle cable carrier for cantilever brake
Dimension 31.8mm Threadless Stem
$30.00 - $34.99
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
Dimension Steerer Extender
$39.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
Dimension Threadless 700c Cyclocross/Hybrid Fork
$89.99
700c Hybrid fork with Cantilever Mounts - Forged dropouts with eyelets, straight-gauge oval-tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - Welded unicrown construction - Clearance for 50mm wide fenders (1 1/8-inch) - Axle to Crown Length: 403mm (1 1/8-inch); 412mm (1 1/8-inch SC); 403mm (1-inch) - Brake Mount (Fork): Canti Studs - Color: Black - Crown Race: 30 (1 1/8-inch, 1 1/8-inch SC); 26 (1-inch) - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50 mm - S.H.I.S. Stem Clamp Diameter: 28.6 (1 1/8-inch, 1 1/8-inch SC); 25.4 (1-inch) - Steerer Tube Length: 300mm (1 1/8-inch); 260mm (1 1/8-inch SC); 300mm (1-inch) - Steerer Type: Straight - Weight: 975g (1 1/8-inch); 1105g (1 1/8-inch SC); 963g (1-inch) - Wheel Size: 700c
Ergon GA2 Fat
$30.00
Ergon's GA2 Fat is for riders with large hands or high demands for damping, offering extra thick circumference. The ergonomically optimized form allows reduced force while gripping, because the grip zones are matched to the hand, allowing greater control on demanding trails. The inner construction varies in thickness allowing for greater damping without loss of control. The GA2 Fat has a superb tactile feel, and the super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.
Ergon GS1
$40.00
Piloted to two Marathon World Championship titles and the Leadville 100 course record! The Ergon GS1 combines comfort and support in a lightweight package for endurance athletes. The exclusive German-produced rubber compound enables precise steering and control, all the while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride tuned flex. - Carbon bar compatible - Uses: mountain bike, marathon, XC
Ergon SMA3 Sport
$80.00
The comfort saddle for All-Mountain riding. Developed with freeride legend and Ergon Factory rider, Richie Schley, the SMA3 Series offers the right balance between performance and comfort. The anatomical design, which is flat and has no kick up in the rear, allows for fast changes between sitting and an aggressive downhill position. Orthopedic padding is used for effective pressure distribution and support. The pronounced relief channel offers maximum pressure relief for sensitive areas. The cover is made of abrasion resistant microfiber. - Shell: nylon composite - Rail: chromoly
Ergon SME3
$80.00
SME3 Series – the saddle used by Richie Rude (Yeti-Fox) and Fabien Barel (Canyon Factory Enduro Team), the top riders of the Enduro World Series. The entry-level model, SME3, offers every feature that enduro and gravity racers demand. Through specific design features, the saddle allows for uninterrupted rider position changes. The demands of enduro and gravity riding are reflected in the form of the saddle padding as well, which overall is relatively flat, with no kick up in the rear. This allows for fast position changes from sitting, to standing, to behind-the-saddle descending. The EVA padding with micro air pockets and a flex optimized shell boosts comfort while pedaling uphill and on long flat traverses. - Rail: chromoly - Cover: microfiber - Padding: orthopedic AirCell foam
Ergon SM Sport Gel Women
$90.00
Ergon's SM Sport Gel is an MTB comfort saddle made especially for women, providing comfort with large gel pads in the sitting area. The saddle is best suited for day-rides, all-mountain and enduro, and provides maximum relief in the sensitive genital area, while sliding flanks reduce friction when pedaling and during quick position changes. Sport-oriented comfort padding, a flat rear section, and freedom of movement add versatility and adaptability to the traditional mountain bike position.
FSA MegaExo Self-Extracting Crank Arm Bolt for 19mm Alloy Cranks
$13.00
This is an FSA MegaExo Crank Arm Bolt for 19mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M12 bolt, M27 self-extracting cap, and washers
FSA Pro Road S10 Chainring
$60.00
FSA's Pro Road chainrings are made from CNC-machined 7000-series aluminum for low weight. The teeth are ramped and pinned for excellent shifting, too.
Fizik Aliante R3 Open
$149.00
With an anatomic cut-out shape and advanced technology, materials and craft, Aliante R3 Open is a performance road saddle for riders who want a waved saddle profile and a pressure relief channel. Made for riders with low body flexibility and high pelvic rotation while pedaling, the Aliante is a waved profile saddle, with support and flexibility so you can ride in comfortable support and always get the power down. Aliante R3 Open has a light, strong, corrosion-resistant K:ium rail. A Comfort Core foam layer beneath the neat, durable Microtex cover provides comfort, which is enhanced by the full anatomic cut-out that avoids pressure on the rider’s sensitive soft tissue and ensures that all weight is correctly supported across the whole surface of the saddle. Like all performance fi’zi:k road saddles, Aliante R3 Open is light, flexible and agile. - Open central cutaway - Carbon-reinforced nylon shell - 7mm k:ium rails - Microtex cover - Integrated Clip System compatible Regular - Dimensions: 278mm x 142mm - Weight: 235g Large - Dimensions: 278mm x 153mm - Weight: 245g
Fizik Antares R3 Open
$149.00
With an anatomic cut-out shape and advanced technology, materials and craft, Antares R3 Open is a performance road saddle for riders who want a medium saddle profile and a cut-out to avoid pressure and numbness. Made for riders with medium body flexibility and low pelvic rotation while pedaling, the Antares is a neutral profile saddle with support and flexibility so you can move to find your power spot and maintain comfort. Antares R3 Open features a composite Carbon-reinforced nylon shell and a light, strong, corrosion-resistant K:ium rail. A Comfort Core foam layer beneath the neat, durable Microtex cover provides comfort, which is enhanced by the full anatomic cut-out that avoids pressure on the rider’s sensitive soft tissue and ensures that all weight is correctly supported across the whole surface of the saddle. Like all performance fi’zi:k road saddles, Antares R3 Open is light, flexible and agile. - Open central cutaway - Carbon-reinforced nylon shell - 7mm k:ium rails - Microtex cover - Integrated Clip System compatible Regular: - Dimensions: 276mm x 142mm - Weight: 215g Large: - Dimensions: 276mm x 153mm - Weight: 220g
Fizik Arione R3 Open
$149.00
With an anatomic cut-out shape and advanced technology, materials and craft, Arione R3 Open is a performance road saddle for riders who want a flat saddle profile and a cut-out to avoid pressure and numbness. Made for riders with high body flexibility and no pelvic rotation while pedaling, the Arione is longer than any other fi'zi:k road saddle, flat from nose to tail and with a narrow nose, so you can move around to find your power spot. Arione R3 Open features a composite Carbon-reinforced nylon shell and a light, strong, corrosion-resistant K:ium rail. A Comfort Core foam layer beneath the neat, durable Microtex cover provides comfort, which is enhanced by the full anatomic cut-out that avoids pressure on the rider’s sensitive soft tissue and ensures that all weight is correctly supported across the whole surface of the saddle. Like all performance fi'zi:k road saddles, Arione R3 Open is light, flexible and agile. With an anatomic cut-out shape and advanced technology, materials and craft, Arione R3 Open is a performance road saddle for riders who want a flat saddle profile and a cut-out to avoid pressure and numbness. - Open central cutaway - Carbon-reinforced nylon shell - 7mm k:ium rail - Microtex cover - Integrated Clip System compatible Regular: - Dimensions: 300mm x 132mm - Weight: 230g Large: - Dimensions: 298mm x 142mm - Weight: 240g
Page 1 of 8 Next page