Parts

Cork wrap is really a lot of foam with cork chunks mixed in. It's thick and softens road vibration. It can soak up moisture yet remains easy to grip. It's durable and easy to install. It holds color well and doesn't fade. You can wash it like you wash the car; soapy rag, scrub, rinse, repeat.

Gecko Grip is EVA foam and ventilated polyurethane in a laminated, layered construction. Gecko Grip has a rubbery, "grippy" feel compared to cork tape. It lays flat on the wrapped bars and is thinner than cork. It doesn't absorb sweat as easily as cork and can be wiped off with a wet rag in seconds.

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind. - 7075 Aluminum thread ring - 7075 Aluminum preload spacer adjuster - Grade 5 Titanium 2.5mm hex fastening bolt - Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.

Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years

- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor - Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors - Designed for up to 210mm rotors - Tabs in adapter mate to (6) M5 rotor bolt holes and is secured by CenterLock-style lockring, sandwiching 6-bolt rotor to adapter - Lockring requires a 16-notch external bearing bottom bracket wrench - CL-IS adapter is black and lockring is black with silver etching: 29g

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6902 Bearing

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Includes end cap for 12 x 142 and 12 x 148mm hubs Fits Shimano 12-speed Micro Spline cassettes Crafted from lightweight aluminum Compatible with 12mm thru-axles

- Aluminum straddle cable carrier for cantilever brake

Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips

Dimension Freewheels are excellent drivetrain component replacements. With smooth shifting performance and durable construction, they'll help breathe new life into older bikes. - A must have in any bicycle service department - One-piece design - Shimano index compatible - Works with most friction shifters - Suitable for use with e-bike drivetrains

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

Features and Benefits - 250cm in Length—accommodates bars up to 50cm - Grip compound maintains traction when wet - Durable stretch for installation - Vibration-damping backer strip - Hard-wearing construction - 3mm thick What It Is ENVE-designed bar tape that provides maximum ride feel without compromising comfort and ensures grip in wet conditions. 250cm in length, 3mm thick, and silicone-backed compound that provides the right amount of stretch for ease of installation and durability. Science & Insight For ENVE, handlebar tape is more than a fashion accessory; it is a key component that sets the tone for your ride. Bar tape that becomes slippery when wet and causes discomfort diminishes confidence and the ride experience. As such, ENVE Handlebar Tape is designed with a grip compound that ensures bare-handed traction despite wet conditions. To maximize ride feel without compromising comfort, ENVE Handlebar Tape is 3 millimeters thick with a vibration-damping silicone backer strip that ensures comfort for long miles over rough roads.

Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.

Ergon's GA2 Fat is for riders with large hands or high demands for damping, offering extra thick circumference. The ergonomically optimized form allows reduced force while gripping, because the grip zones are matched to the hand, allowing greater control on demanding trails. The inner construction varies in thickness allowing for greater damping without loss of control. The GA2 Fat has a superb tactile feel, and the super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly. - Length: 136mm - Lock On: Yes - Weight: 135g